|
| |
 Pondmate
pumps with pre filter ... 240 volt
Submersible
or In-line pumps
- Fresh or Salt water - 700 to
8,500 lph
|
For Ponds, Fountains, Waterfalls, Marine Aquariums, Industrial etc.
|
|
 |
-
TWO year warranty**
-
Removable
pre-filter sponge
-
Flow adjustment dial
-
Suitable for In-line use
-
Great reliability for the price
** Including impeller |
|
Optional Spray fountain heads available |
|
  |
Aussie's observations about
Pondmate pumps
|
|
Suitable for: Pond
circulation, waterfalls, fountains streams, filters (in-pond or external) |
What was liked:
The 2 year warranty on both the pump and impeller.
The quality and features are excellent for the price point,
very good value for money.
The flow adjustment knob is easy to use and on the intake (suction side) of the
pump as it should be. Flow adjustment dial on all models
Best of all the reliability for the price has been excellent.
This pump sits at the very top end of pumps made in China. |
|
Less than ideal: Nothing for the price point |
Other pumps of this type:
Oase Neptun
Eden Pondmate
Large up to 28,000 LPH
For low voltage
models up to 3500 LPH |
|
|
Made in China
2 year warranty |
Pond Mate
PM700P |
Pond Mate
PM1000P |
Pond Mate
PM1500P |
Pond Mate
PM2400P |
Pond Mate
PM3500P |
|
Max Litres
per hour
|
700 |
1,000 |
1,500 |
2,400 |
3,500 |
|
Head - or
zero flow height |
1.2m |
1.8m |
1.8m |
2.3m |
2.8m |
|
Flow rate
at different pumping
heights |
Chart below |
Chart below |
Chart below |
Chart below |
Chart below |
|
Power usage - watts/Annual running
cost for 24/7* |
10 / $12 |
16 / $20 |
20 / $24 |
40 / $48 |
70 / $84 |
|
Voltage (see prices below) |
240 & 12 |
240 & 24 |
240 & 24 |
240 & 24 |
240 & 24 |
|
Length, width,
height - Cm |
11 x 6 x 7 |
12 x 6 x 10 |
12 x 6 x 10 |
14 x 8 x 11 |
15 x 9 x 13 |
|
Fountain spray heads are optional |
See
below |
See
below |
See
below |
See
below |
See
below |
|
Flow
adjustment on pumps |
yes |
yes |
yes |
yes |
yes |
|
Cord length - 240 volt pumps |
10m |
10m |
10m |
10m |
5m |
|
Salt or Fresh water use |
Yes |
Yes |
Yes |
Yes |
Yes |
|
Shaft material |
Ceramic |
Ceramic |
Ceramic |
Ceramic |
Ceramic |
|
Thermal shut off **** |
Yes |
Yes |
Yes |
Yes |
Yes |
|
Outlet (delivery) thread
|
3/8" BSP
female |
I/2" BSP
female |
1/2" BSP
female |
1/2" BSP
female |
3/4" BSP
female |
|
Outlet Hose tail - mm |
10 & 12.5 |
12.5 |
12.5 & 20 |
12.5 & 20 |
25 |
|
Inlet (suction) thread
if used
as an in-line pump# |
1/2" BSP
female |
1/2" BSP
female |
1/2" BSP
female |
1" BSP
female |
1" BSP
female |
|
Inlet Hose tail - if used as an in-line pump - mm |
20 |
20 |
20 |
20 |
Optional ## |
|
Removable foam pre-filter |
Yes |
Yes |
Yes |
Yes |
Yes |
|
Optional foam block filter |
yes |
yes |
yes |
yes |
yes |
|
|
|
|
|
|
|
National
warranty - Australia wide
(for more details) impeller - 2 years |
2 years |
2 years |
2 years |
2 years |
2 years |
|
240 volt
models
- Price >
For low voltage models |
$42
PM700P |
$44
PM1000P |
$53
PM1500P |
$72
PM2400P |
$99
PM3500P |
|
Optional spray fountain head kits for
pumps on this page, Photo |
n/a |
$14 |
$14 |
$19 |
$19 |
|
For volume pricing - call for special pricing |
Larger sizes below |
|
*Based
on running a pump 24/7 continuously for one year. The formula we use is $1.20
per watt per year. (Some states will be slightly less, while some will be up to
30% higher) |
|
|
|
Made in China
2 year warranty |
4800P |
6000P |
8500P |
For Pondmate pumps
larger than 8500 |
|
Max Litres
per hour
|
4,800 |
6,000 |
8,500 |
|
Head - or
zero flow height |
4.0m |
4.0m |
5.5m |
|
Flow rate at different
heads |
Chart below |
Chart below |
Chart below |
|
Power usage - watts/Annual running
cost for 24/7* |
90 / $108 |
130 / $156 |
230 / $276 |
|
Length, width,
height Cm |
18 x 10 13 |
18 x 10 13 |
21 x 12 x 17 |
|
Voltage |
240 volts |
240 volts |
240 volts |
|
Vortex impeller - for solids and dirty water |
no |
no |
no |
|
For pumps with vortex
impellers |
|
Flow
adjustment on pump |
yes |
yes |
yes |
|
Cord length |
10m |
10m |
10m |
|
Salt or Fresh water use |
yes |
Yes |
Yes |
|
Shaft material |
Ceramic |
Ceramic |
Ceramic |
|
Thermal shut off (automatic) |
yes |
Yes |
Yes |
|
Outlet (delivery) thread
|
3/4" BSP
female |
3/4" BSP
female |
1" BSP
female |
|
Outlet Hose tails included |
## |
## |
## |
|
Inlet (suction) thread
if used
as an in-line pump |
1" BSP
female |
1" BSP
female |
1" BSP
female |
|
Inlet Hose tail if used in-line |
## |
## |
## |
|
Removable pre-filter |
Yes |
Yes |
Yes |
|
Optional foam block filter |
yes |
yes |
yes |
National
warranty - Australia wide
(for more details)
Including impeller
|
2 years |
2 years |
2 years |
|
Price
- Aus $
Including GST |
$139
PM4800P |
$159
PM6000P |
$179
PM85000P |
|
Optional spray fountain head kits for
pumps on this page, Photo |
$19 |
$19 |
$33 |
|
For volume discounts-
call for special pricing
Solar option>Solar conversion kit
for pump
- from $268 ...
For more information |
For larger
Pondmate pumps |
|
|
 |
#Suitable for dry mounting provided the pump
is gravity feed (flooded suction).
**If you need a hose tail of a different size, let us know and we
will provide the correct size
****Thermal shut off - If the pump overheats the automatic thermal switch shuts
down the pump. This may be caused by lack of water, debris caught in the
impeller or many other reasons. Once the
thermal switch cools the pump will start again. However, if the cause of the
problem is not addressed quickly the pump will stop again, and again and then
die.
## No hose tails provided - If you
are to be using this pump in-line (dry mounted) tell us what size inlet hose
you will be using. |
Flow rates at different pumping heights - litres per hour
|
|
Model
|
@ 0cm
|
@ 50cm
|
@1.0m
|
@1.5m
|
@2.0m
|
@3.0m
|
@4.0m |
@5.0m |
Head / Shut Off** |
|
700P |
700 |
510 |
240 |
- |
- |
- |
- |
- |
1.2m |
|
1000P |
1,000 |
900 |
750 |
400 |
- |
- |
- |
- |
1.8m |
|
1500P |
1,500 |
1,200 |
950 |
500 |
- |
- |
- |
- |
1.8m |
|
2400P |
2,400 |
2,100 |
1,800 |
1,400 |
450 |
- |
- |
- |
2.3m |
|
3500P |
3,500 |
3,100 |
2,650 |
2,300 |
1,350 |
- |
- |
- |
2.8m |
|
4800P |
4,800 |
4,350 |
4,100 |
3,800 |
3,200 |
2,000 |
- |
- |
4.0m |
|
6000P |
6,000 |
5,600 |
5,200 |
4,700 |
4,000 |
2,600 |
0 |
- |
4.0m |
|
8500P |
8,500 |
8,200 |
7,800 |
7,200 |
6,800 |
5,700 |
3,800 |
1,600 |
5.5m |
|
For 10,000
LPH and larger Pondmate pumps
**Head
/ shut off - The higher the water is
pumped, the less the flow until the maximum pumping height is reached. It is
critical that this is understood, this height is where the water stops flowing.
|
 |
|
|
