|
| |
 Pondmate
Vortex pumps* DWP series
*Also known as Dirty water pumps "DWP"
Submersible
or In-line pumps - Fresh or Salt water 6,000 to
28,000 lph
|
Pumps for
....
Water Features, Fountains, Waterfalls, Marine Aquariums, Industrial etc.
|
 |
-
2 year warranty*
-
Great reliability for the price
-
Suitable for In-line use
* Including impeller
|
|
These models can be rotated on their base 90 degrees
either side to give 3 outlet angles |
|
  |
Aussie's observations
|
|
Suitable for: Water features,
also for pond
circulation, waterfalls, fountains streams, some filters (but check with us
first) |
What was liked:
The 2 year warranty on both the pump and impeller.
The quality and features are excellent for the price point,
very good value for money.
Best of all the reliability for the price has been excellent.
This pump sits at the very top end of pumps made in China. |
|
Less than ideal: Nothing for the
price point. |
|
Other pumps of this type: Pondmate
P series
Oase
Aquamax
Blagdon
Force Hybrid Laguna
Maxflo
Aquagarden Barracuda |
|
|
Made in China
2 year warranty |
Pondmate
6000
-DWP |
Pondmate
8000
-DWP |
Pondmate
10000-P |
Pondmate
15000-P |
Pondmate
18000-P |
Pondmate
28000 DWP |
|
Max Litres per hour
|
6,000 |
8,000 |
10,000 |
15,000 |
18,000 |
28.000 |
|
ead - or
zero flow
height** |
5.0m** |
7.0m** |
9.0m** |
5.0m** |
6.0m** |
7.0m** |
|
Flow rate at different heads |
Chart below |
Chart below |
Chart below |
Chart below |
Chart below |
Chart below |
|
Power usage - watts/Annual running cost for 24/7**** |
150 / $180 |
200 / $240 |
250 / $300 |
200 / $240 |
250 / $300 |
550 / $690 |
|
Length, width, height Cm |
23x12x14 |
23x12x14 |
28x15x17 |
28x15x17 |
28x15x17 |
30x15x17 |
|
Voltage |
240 volts |
240 volts |
240 volts |
240 volts |
240 volts |
240 volts |
|
Vortex impeller - for solids |
yes |
yes |
yes |
yes |
yes |
yes |
|
Flow adjustment on pump |
no |
no |
no |
no |
no |
no |
|
Cord length |
10m |
10m |
10m |
10m |
10m |
10m |
|
Salt or Fresh water use |
Yes |
Yes |
yes |
Yes |
Yes |
Yes |
|
Shaft material |
Ceramic |
Ceramic |
Ceramic |
Ceramic |
Ceramic |
Ceramic |
|
Thermal shut off (automatic) |
Yes |
Yes |
Yes |
Yes |
Yes |
Yes |
|
Outlet (delivery) thread
|
1" BSP
both m & f |
1" BSP
both m & f |
1" BSP
both m & f |
1 1/2" BSP
both m & f |
1 1/2" BSP
both m & f |
1 1/2" BSP
both m & f |
|
Outlet Hose connection included |
## |
## |
## |
## |
## |
50mm |
|
Inlet (suction) thread
if used as an in-line pump |
1" BSP
female |
1" BSP
female |
1" BSP
female |
1 1/2" BSP
female |
1 1/2" BSP
female |
1 1/2" BSP
female |
|
Inlet Hose connection included if used in-line |
32mm |
32mm |
## |
## |
## |
50mm |
|
Removable pre-filter |
no |
no |
no |
no |
no |
no |
|
Optional foam block filter |
yes |
yes |
no |
no |
no |
no |
|
National warranty - Australia wide
(for more details)
Including impeller - 2 years |
2 years |
2 years |
2 years |
2 years |
2 years |
2 years |
|
Price
- Aus $ Including GST |
$227
PM6000
-DWP |
$269
PM8000
-DWP |
$339
PM10000-P
* |
$389
PM15000-P
* |
$459
PM18000-P
* |
$649
PM28000 DWP
|
|
Solar option>Solar conversion kit for pump
- from $269 ...
For more information |
|
For volume discounts-
call for special pricing
For smaller
Pondmate pumps
click here |
|
*Soon
to known as DWP not P - Number change due shortly
**Head
/ shut off - The higher the water is pumped, the less
the flow until the maximum pumping height is reached. It is critical that this
is understood, this height is where the water stops flowing.
****Based on running a pump
24/7 continuously for one year. The formula we use is $1.20 per watt per year.
(Some states will be slightly less, while some will be up to 30% higher)
##Pondmate supply a range of hose connections (tails) with each pump, however,
we have found that in many cases they are not the correct size for hose
available in Australia. If you want a specific hose tail to be supplied with
your pump please tell us and we will provide it.. |
|
|
|
 |
Flow rates at different pumping heights - litres per hour
|
|
Model
|
@ 0cm
|
@1.0m
|
@2.0m
|
@3.0m
|
@4.0m |
@5.0m |
@6.0m |
@7.0m |
Head / Shut Off** |
|
6000-DWP |
6,000 |
5,700 |
5,100 |
3,780 |
2,500 |
0 |
- |
- |
5.0m |
|
8000-DWP |
8,000 |
7,680 |
7,500 |
6,720 |
5,520 |
3,780 |
2,580 |
0 |
7.0m |
|
10000-P* |
10,000 |
9,600 |
9,300 |
8,400 |
7,920 |
6,780 |
5,820 |
4,200 |
9.0m |
|
15000-P* |
15,000 |
13,200 |
11,700 |
9,300 |
5,580 |
0 |
- |
- |
5.0m |
|
18000-P* |
18,000 |
16,500 |
14,640 |
12,660 |
9,960 |
6,060 |
0 |
- |
6.0m |
|
28000-DWP |
28,000 |
26,700 |
23,000 |
19,500 |
15,000 |
10,800 |
5,820 |
0 |
7.0m |
|
**Head
/ shut off - The higher the water is
pumped, the less the flow until the maximum pumping height is reached. It is
critical that this is understood, this height is where the water stops flowing.
|
|
|
