creative pumps logo



 
  Delivery Only $10*      Retail and Trade**
     *
To any address in Australia - For more details           
Checkout - View

 

    Our 11th Year Selling Online ..... **Direct to > NSW,  Vic,  Qld,  WA,  SA,  Tas,  NT              

Pondmate  Low volt  pumps - 12 & 24 volt
Submersible or In-line pumps - Fresh or Salt water  - 700 to 3,500 lph

For Ponds, Fountains, Waterfalls, Marine Aquariums, Industrial etc.

      pondmaste pump head pump

  • TWO year warranty**
     
  • Removable pre-filter sponge
     
  • Flow adjustment dial on pump
     
  • Suitable for In-line use
     
  • Great reliability

   ** Including impeller

Optional Spray fountain heads available

Aussie's observations about Low volt Pondmate pumps

Suitable for: Pond circulation, waterfalls, fountains streams, filters (in-pond or external)
What was liked: The 2 year warranty on both the pump and impeller. The quality and features are excellent for the price point, very good value for money. The flow adjustment knob is easy to use and on the intake (suction side) of the pump as it should be. Flow adjustment dial on all models
Best of all the reliability for the price has been excellent. This pump sits at the very top end of pumps made in China.

Less than ideal: Nothing for the price point

Other pumps of this type:  Low voltage > Oase Neptun
                                         In 240 volt >Pondmate      Eden   
  Oase Neptun

Made in China
2 year warranty

Pond Mate
700PLV
Pond Mate
1000PLV
Pond Mate
1500PLV
Pond Mate
2400PLV
Pond Mate
3500PLV
Max Litres per hour 700 1,000 1,500 2,400 3,500
Head - or zero flow height  1.2m 1.8m 1.8m 2.3m 2.8m
Flow rate at different pumping heights

Chart below

Chart below Chart below Chart below Chart below

Power usage - watts/Annual running cost for 24/7*

10 / $12 16 / $20 20 / $24 40 / $48 70 / $84
Voltage 12 24 24 24 24
Cord length - Low volt pumps 7m*** 7m*** 7m*** 7m*** 7m***
Transformer included 12volt AC 24 volt AC 24 volt AC 24 volt AC 24 volt AC
Length, width, height - Cm 11 x 6 x 7 12 x 6 x 10 12 x 6 x 10 14 x 8 x 11 15 x 9 x 13
Fountain spray heads are optional See
 below
See
 below
See
 below
See
 below
See
 below
Flow adjustment on pumps yes yes yes yes yes
Salt or Fresh water use Yes Yes Yes Yes Yes
Shaft material Ceramic Ceramic Ceramic Ceramic Ceramic
Thermal shut off **** Yes Yes Yes Yes Yes
Outlet (delivery)  thread 3/8" BSP
female
I/2" BSP
female
1/2" BSP
female
1/2" BSP
female
3/4" BSP
female
Outlet Hose connection - mm 10 & 12.5 12.5 12.5 & 20 12.5 & 20  25
Inlet (suction) thread if used as an in-line pump# 1/2" BSP
female
1/2" BSP
female
1/2" BSP
female
1" BSP
female
1" BSP
female
Inlet Hose connection - if used as an  in-line pump - mm 20 20 20 20 Optional ##
Removable foam pre-filter supplied Yes Yes Yes Yes Yes
Optional larger foam block filter yes yes yes yes yes
National warranty - Australia wide
(for more details)  impeller - 2 years
2  years 2 years 2 years 2 years 2 years

   Low voltage -  Price
Including AC transformer
 

$55
PM700PLV
$66
PM1000PLV
$88
PM1500PLV
$106
PM2400PLV
$134
PM3500PLV

                                                                                                 240 volt models

Optional spray fountain head kits for pumps on this page, Photo 

n/a $14 $14 $19 $19

*Based on running a pump 24/7 continuously for one year. The formula we use is $1.20 per watt per year. (Some states will be slightly less, while some will be up to 30% higher)

**Optional: Pondmate  Low voltage extension - 10m  $19 each*
*Only one can be used without loss of performance
 

         
Total shipping per order Only $10
to any Australian Address - Prices Include GST
Trade customers - Buying for resale - Call 1800 607 388 or click > Trade contact

 

#Suitable for dry mounting provided the pump is gravity feed (flooded suction). 
**If you need a hose tail of a different size, let us know and we will provide the correct size
****Thermal shut off - If the pump overheats the automatic thermal switch shuts down the pump. This may be caused by lack of water, debris caught in the impeller or many other reasons. Once the thermal switch cools the pump will start again. However, if the cause of the problem is not addressed quickly the pump will stop again, and again and then die.
## No hose tails provided - If you are to be using this pump in-line (dry mounted) tell us what size inlet hose you will be using.

***Low voltage cable length - Pondmate Low Voltage pumps are provided with 7m of cable, 2m from the wall plug to the transformer and 5m from the transformer to the pump. However, low voltage cable can simply be extended up to 10m with only slight loss of performance and longer if required. This cable need not be buried or protected, greatly simplifying installation.

Optional low voltage cable - cut to length @ $2.90 per m

Flow rates at different pumping heights - litres per hour

Model @ 0cm @ 50cm @1.0m @1.5m @2.0m Head / Shut Off**
PM700PLV 700 510 240 - - 1.2m
PM1000PLV 1,000 900 750 400 - 1.8m
PM1500PLV 1,500 1,200 950 500 - 1.8m
PM2400PLV 2,400 2,100 1,800 1,400 450 2.3m
PM3500PLV 3,500 3,100 2,650 2,300 1,350 2.8m

**Head / shut off - The higher the water is pumped, the less the flow until the maximum pumping height is reached. It is critical that this is understood, this height is where the water stops flowing.

Spare Parts
Home  l  Site map - (Full index)   l Contact Us   l   Help / ideas (Pond equipment)  l    About Us  l    Customer care - (policy etc) 
  Ordering   l    Links   l   About our encryption     l   Checkout - View  

Creative Pumps   872-874 South Rd,  Edwardstown. South Australia 5039  Map to find us 
Phone: 08 8297 3800   Fax: 08  8297 8603  
Contact Us (All options)   E&OE    ABN 49 126 712 703

south road

Copyright © 2008 Creative Pumps etc
No part of this website may be reproduced without written permission of the owner. All rights reserved.