Home   |   About Us   |   Contact Us   |   Trade Prices   |   Delivery   |   View Checkout   |   
Creative Pumps Thawte Logo

 Oase Logo Oase Pondovac 4... The Ultimate Pond Vacuum Cleaner

Continuous use .... No stopping to empty the canister

The Oase Pondovac 4 is the top of the line Pond vacuum cleaner. It features dual chambers, for continuous operations. This means no stopping from having to wait for the pond vacuum cleaner to discharge the waste water. The vacuum cleaner has a 1800 watt motor, for high speed suction. It has a 5 metre suction hose and a 2.5 metre discharge hose.
Oase Pondovac 4 Oase handle vacuum 4 Oase pond vacuum cleaner 4
Showing the 5m hose and wand Transport handle in closed position Wheels for easy movement
Oase pond vacuum cleaner cross section Oase pond vacuum clean operation Oase Pondovac 4 sludge out
The two chamber system** On / off switch and transport handle Complete system
Oase pond vacuum cleaner discharge bag Vacuum Tools Oase pond vacuum cleaner suction in pond
Optional discharge extension
(one is provided with the vac)
All the tools String Algae nozzle in action
Nozzles included a special string algae nozzle, a wide nozzle with a rubber lip, a crevice tool and a floor nozzle, an adjustable suction nozzle (inlet opening is adjustable from 2mm to 10mm)

Oase Pondovac 4 made in Germany

Dimensions (mm) 380 x 380 x height 685
Weight 16 KG
Voltage 230 volt AC
Power consumption (watt) 1,700
Particle size range 2-10 mm
Length of suction hose 5 m
Length of discharge hose 2.5m
Power cable length 4 m
Warranty 3 years
Oase Pondovac 4 $979
Please note, these are not suitable for commercial operation, no warranty is given.
**Unit must be placed above pond or filtration level for discharge to occur, there is no pump inside unit. Otherwise unit will fill up with water before other chamber has had time to empty.

Optional .... Discharge extension kit*$239
*part number 55448 2.5m Discharge hose & connectors with a capture bag.




click price tab          View cart
Total shipping per order Only $10 to any Australian Address - Prices Include GST
Trade customers - Buying for resale - Call 1800 607 388 or click > Trade contact




A break through in pond vacuum design

Suitable for ponds over about 3,000 litres. As a guide, cleaning a pond about 4m x 4m x .4m deep should take about 20 - 25 minutes provided there are not to many obstructions

Vacuum the pond clean without stopping! Pondovac 4 avoids the annoyance of container capacity restrictions (Like the Pondovac Start Classic and Ubbink models), allowing the pond to be vacuumed without stopping.

How is this done **The two chamber System
Two identically sized cylinders are filled and emptied in alternating cycles. If one container is full then a valve is mechanically activated by a float. This triggers emptying of one and at the same time allows the other cylinder to be filled. This is how both vacuuming and emptying of the container can occur at the same time!

  • Wheels allow the vacuum can be easily moved.
  • Nozzles included a special string algae nozzle, a wide nozzle with a rubber lip, a crevice tool and a floor nozzle, an adjustable suction nozzle (inlet opening is adjustable from 2 mm to 10 mm)
  • It is also ideally suited for wet vacuum implementation in the household.

Clear pond water at last!
The use of well designed filter systems, following good advice from specialists and observing the laws of nature help you to keep your pond water clear; so clear that you can see the bottom of the pond. However, this often reveals the thick, unsightly layer of sludge, dead vegetation, fish waste, cut grass and leaves at the bottom of the pond. Not only is this debris unsightly it also produces ammonia and the foul gases which all pond owners fear.

OASE have now come up with a solution to the problem.
Pondovac 4 makes it possible to remove the sludge from a pond (up to 1.5m in depth) without having to go to the trouble of pumping the water out of the pond, without having to evacuate the pond dwellers and without irritation from the pungent smell of ammonia.

This sludge vacuum cleaner can remove dirt particles up to 10 mm in size, algae, sludge, and dead vegetation from the pond by way of suction. The discharged sludge and water is sent directly** to garden beds or grass as fertilizer. Coarse debris can be collected in the special mesh bag if needed. **As an alternative a simple filter could be set up so the water was recycled and the sludge captured in the filter.

As a rough guide, a pond about 4m x 3m should take about 25 to 30 minutes to vacuum provided there were not to many obstructions. (This vacuum can of course handle much larger ponds that 4m x 3m)

  • Pondovac 4, for fast, easy and clean pond sludge removal.
  • The Pondovac 4 can also be used as a wet vacuum cleaner.

Other Pond Vac's available

Spare Parts