Home   |   About Us   |   Contact Us   |   Trade Prices   |   Delivery   |   View Checkout   |   
Creative Pumps Thawte Logo
bottom-footer

Lance Jet (Single) fountain nozzles

Chrome plated brass - Swivelling nozzle**

Lance jet nozzles

 

 

 

 


 

For more photos

Lance Jet nozzles out of water
     Also available in brass
     finish by special order

Hole in
jet nozzle
Male BSP thread Nozzle
Height*
Maximum
water jet
height
The pump required to reach the maximum water jet height
 must have this flow per
minute @ the shown
head height ***
Aus $
4mm 3/8" 45 mm 2.5m 5 lpm @ 2.7m $59
6mm 3/8" 45 mm 4.0m 17 lpm @ 4.8m $59
8mm 1/2" 65 mm 5.0m 42 lpm @ 6.0m $89
10mm 1/2" 65mm 7.0m 69 lpm @ 8.7m $89
12mm 1" 96mm 8.0m 107 lpm@ 10.0m $225
14mm 1" 96mm 10m 168 lpm @ 14.0m $225
16mm 1 1/2" 142mm 12.0m 215 lpm @ 16.0m $579
19mm 1 1/2" 142mm 14.0m 345 lpm @ 19.5m $579
25mm 2 1/2" 256mm 40m 845 lpm @ 50m Call
29mm 2 1/2" 256mm 60m 1,480 lpm @ 75m Call
38mm 100mm flange 370mm 80m 2,694 lpm @ 100m call
44mm 100mm flange 370mm 120m 4,700 lpm @ 150m call
64mm 150mm flange 545mm 120m 10, 765 lpm 150m call
76mm 150mm flange 545mm 140m 16,397 lpm @ 175m call
Special note: For the best spray performance a straight rise pipe under the spray jet of 10 times the diameter of the tube will reduce turbulence and improve performance. Example: If the tube being used is 10mm a straight run prior to the nozzle of 100mm is recommended
 
border

border

border
border

click price tab          View cart
Total shipping per order Only $10 to any Australian Address - Prices Include GST
Trade customers - Buying for resale - Call 1800 607 388 or click > Trade contact

border
border

border

border
 

*Height from top of thread to top of fountain nozzle.
**Fountain nozzle can be swivelled in any direction up to 10 degrees from vertical
*** Call for performance details when using a smaller pump than shown above

Hose size suggestion.... The hose size should be 4 to 5 times the diameter of the hole in the nozzle

Nozzle specifications