Home   |   About Us   |   Contact Us   |   Trade Prices   |   Delivery   |   View Checkout   |   
Creative Pumps Thawte Logo
bottom-footer

Onga Pentair water logo - Creative PumpsOnga Hi-flo 400 series Centrifugal water transfer pumps

Single phase 230 - 240 volt In-line dry mounted pumps


The 400 series pumps are popular for their 413, 414 and 415 plastic housing constructed pumps. These materials are corrosion resistant. The Onga Hi-flo series of pumps are ideal for water transfer for streams, waterfalls, ponds, aquaculture, aquaponics, agriculture and various industry.

onga water transfer pump

For:

  • Streams

  • Waterfalls

  • Pond's

  • Water transfer

  • Agricultural

  • Aquaculture

  • Industrial etc

Aussie saysBest - This is our ratings for these pumps

Our observations

What we liked: .These pumps are quality made by one of our best and respected pump manufacturers.  Excellent pumping heights. Great value for money
Suitable for: Waterfalls, streams, large pond circulation, aquaculture.
Not suitable for: 24/7 running* Filters unless the are mounted high enough to overcome the high head  *Unless the 413 - 24/7 model is purchased with it's modified internals
Other pumps of this type: CNP pumps  Bianco
Made in Australia 
1 year warranty
Onga Hi-flo Centrifugal
413
No 341300
414
No 341400
415
No 341500
Approx  Litres per hour (zero head) 10,800 12,600 18,000
Approx  Litres per min (zero head) 180 210 300
Horse power / Amps (full current) 1/2 HP /  2.5A 3/4 HP /  2.5A 1 HP /  4.3A
Head - or zero flow height  16m 16m 20m
Flow at different pumping heights Chart below Chart below Chart below
Power usage - watts / Annual running cost  based on 24/7* 400 550 750
Rated for 24/7 continuous use no** no** no**
Voltage 230 - 240 230 - 240 230 - 240
Size  L x  W x  H  (cm) 34 x 18 x 23 34 x 18 x 23 34 x 18 x 23
Length power cord 2m 2m 2m
Outlet (delivery) Male thread 1' BSP 1 1/4' BSP 1 1/4" BSP
Inlet (suction ) Male thread 1' BSP 1 1/4' BSP 1 1/4" BSP
Thermal overload protection -
 Inbuilt auto reset
yes yes yes
National warranty-
Australia wide (for more details)
1 year 1 year 1 year
Prices - Aus $ Including GST $319 $394 $539
**Can be used for 16 hours maximum, then at least 8 hours off before restating
 
border

border

border
border

click price tab          View cart
Total shipping per order Only $10 to any Australian Address - Prices Include GST
Trade customers - Buying for resale - Call 1800 607 388 or click > Trade contact

border
border

border

border
 

Confused about selecting the right pump?

Suction and discharge pipes... should be equal or larger than the plum inlet and discharge  (if possible inlet larger than discharge)

Priming .... To prime pump , remove priming plug on to of the pump and fill with suction pipe with water. Replace plug and start pump. (a check or foot valve is required)

Suction limit .... The practical limit is 6m, depending on installation

 

Flow rates at different pumping heights - litres per hour

400 series
Model
Approx @ 0cm @5m @7,5m @10m @12.5m @15m @17.5m Head / Shut Off**
413 10,800 9,600 8,400 6,200 4,500 1,200 - 16m
414 12,000 10,500 9,400 7,300 4,400 1,200 - 17m
415 18,000 16,200 13,500 12,000 9,900 6,700 3,900 21m

**Head / shut off - The higher the water is pumped the less the flow, until the maximum pumping height is reached. It is critical that this is understood, this height is where the water stops flowing.

 Back to main index