For submerged use in parts washers using aqueous solutions or UL listed solvents
- 1/40 HP epoxy-encapsulated motor
- Polyester housing
- 1/2" MNPT Master Builders conduit fitting
- Rated for continuous duty
- IP 68
- Completely submersible
Item number | PE2YSA |
Model Number | 14940101 |
Max litres per hour | 1134 |
Max litres per minute | 18.9 |
Voltage / hertz | 230 / 50 |
Horsepower | 1/40 |
Watts | 45 |
Amps | 0.4 |
Cord length | 1.8 metres |
Motor type | Epoxy filled |
Continuous duty rated | Yes |
Shaft material | Stainless steel |
Shaft seal | Viton |
Housing material | Polyester |
Shut off (Max head) | 2.5m |
Discharge thread | ¼" NPT |
Size: L x W x H - mm | 137 x 74 x 140 |
Additional information | Click Here |
Flow rates at different pumping heights - litres per hour | ||||
Model | @ .3m | @ .9m | @ 1.5m | Head / Shut Off** |
PE-2YSA | 1067 | 912 | 662 | 2.5m |
**Head / shut off - The higher the water is pumped, the less the flow until the maximum pumping height is reached. It is critical that this is understood, this height is where the water stops flowing. |
Rating:
Suitable for:
To replace faulty pumps in parts washers.
What we liked:
Little Giant make the best specialty pumps for these kinds of jobs.
Less than ideal:
Nothing at all, Little Giant are market leaders.