Home   |   About Us   |   Contact Us   |   Trade Prices   |   Delivery   |   View Checkout   |   
Creative Pumps Thawte Logo
bottom-footer

Flojet - 1855 0000A Waste Pump self-priming Macerator

Flojet 18550000A Macerator waste pump

Flojet Macerator 18550 000a inline septic tank pump

Applications

  • Empty holding tanks and avoid dump stations
  • Transfer waste from recirculating toilets to main holding tank

Features

  • Grinds waste as it pumps
  • 13 GPM (49 LPM) flow rate
  • Intake Port: Up to 3" (75mm) hose
  • Discharge: 1" (25mm) hose barb
Detailed Description

Self-priming flexible impeller features stainless steel wear plate and cutter that reduces particle size to 1/8".

Exclusive Run-Dry Protection Device automatically shuts off the pump after approximately 20 seconds of run-dry operation, protecting the pump from serious damage.

Open inlet and 1-1/2" N.P.T (Male) outlet.

Flojet Macerator pump grinds waste into small particles as it pumps. This allows the use of a 1 hose for waste discharge outlet.

The Macerator is available with a 1-1/2 combination barb-threaded inlet or a 3 slip fitting inlet. The outlet is a 1 barb fitting.

Fast holding tank pumps out in only 3-4 minutes for a 30 gallon holding tank.

Technical sheet

Flojet Portable Macerator
 

Flojet
Model No
Voltage L/min
max
PSI
setting
Impeller Macerator Flojet
Price
18550-000 12 Volt DC 49 0 Nitrile Compound Stainless Steel $444
 
border

border

border
border

click price tab          View cart
Total shipping per order Only $10 to any Australian Address - Prices Include GST
Trade customers - Buying for resale - Call 1800 607 388 or click > Trade contact

border
border

border

border
 
Full Details
Suitable uses Emptying holding tanks, on recreational vehicles, quicker at dumping stations.
Warranty 12 months National Warranty Aust wide
Materials used Impeller: Jabsco Nitrile Compound   Macerator: Stainless Steel
Electrical Voltage: 12v DC   Amp draw: 16    Watts: 192   Power lead length: 300mm
On / Off switch No
Pressure switch No
Self prime Self priming, flexible impeller, stainless steel wear plate
Suction Strainer No
Inlet/Outlet Ports Inlet: Will take up to 3" Hose   Outlet: 1" ID hose barb
Connections Included None
Fan cooled motor No
Dimensions Length: 215mm   Height: 105mm    Width: 100mm (105mm mounting feet width)
Made in: Mexico
Spare Parts Click here for spare parts