Home   |   About Us   |   Contact Us   |   Trade Prices   |   Delivery   |   View Checkout   |   
Creative Pumps Thawte Logo
bottom-footer

FloJet "Quad Pump" 4300-343 Diaphragm pump 24 volts dc

Model: 4300-343
*Also known as 4300-342 (identical pump, different number)

FloJet 4300-343 24v DC diaphragm pump

Technical data sheet

The Flojet 4300-343 is self-priming. It may be located several feet from the tank, above or below the liquid level (it is not a submersible pump).

For vertical pump mounting be sure that the motor is located on top. This will prevent water from entering the motor chamber in event of a leak.

  • Built-in pressure switch automatically starts and stops pump instantaneously when discharge valve opens and closes
  • Compact design and plug-in port fitting make installation easy.
  • Can run dry without damage and handle liquids up to 54C (130F).
  • No metal contact with liquid being pumped.
  • Ball bearing drive throughout pump and motor assures longer pump life.
  • Excellent self-priming capability. Pump may be located above the liquid level.
  • Powerful, permanent magnet motor with low current draw and long life brushes.
FloJet
Model No
Voltage L/min
max
PSI
setting
Diaphragms Valves Price
4300-343 24v DC 19 45 Santoprene EPDM $319
 
border

border

border
border

click price tab          View cart
Total shipping per order Only $10 to any Australian Address - Prices Include GST
Trade customers - Buying for resale - Call 1800 607 388 or click > Trade contact

border
border

border

border
 
Full details
Suitable Uses Water transfer, pressure water supply to a mobile home, boat or weekender
Suitable liquids Portable water and some dilute chemicals - Click here for material charts
Warranty 12 months National Warranty Aust wide
Materials used Pump Head: Polypropylene   Diaphragms: Santoprene    Valves: EPDM
Electrical Voltage: 24v DC   Amp draw: 6.5A    Watts: 156W   Power lead length: 40cm
Pressure switch Cut out pressure: 45 PSI (3.1 bar)
Internal Bypass No
Self prime Up to 2.4m maximum
Suction Strainer Not included - Click here for options
Liquid Temperature 54C Maximum
Inlet/Outlet Ports Snap-in port
Connections Included 2 x straight hose barbs for 20mm - Click here for other options
Fan cooled motor Yes
Dimensions Length: 235mm   Height: 95mm    Width: 81mm
Made in: Mexico
Spare Parts Click here for all spare parts
Accessories Click here for accessory index