Home   |   About Us   |   Contact Us   |   Trade Prices   |   Delivery   |   View Checkout   |   
Creative Pumps Thawte Logo
bottom-footer

FloJet - 3811-242 "Duplex" Diaphragm pump

Model: 3811 - 242   back to 230v index   Used extensively in carpet cleaners

Flojet 3811-242

Technical data sheet

The Flojet 3811 series is self-priming.

For vertical pump mounting be sure that the motor is located on top. This will prevent water from entering the motor chamber in event of a leak.

  • Built-in pressure switch automatically starts and stops pump instantaneously when discharge valve is opened and closed.
  • Pump head may be rotated in 90 increments to simplify plumbing.
  • Can run dry without damage and handle liquids up to 71C (170F).
  • Duplex Diaphragm Design eliminates troublesome shaft seal.
  • No metal contact with liquid being pumped.
  • Ball bearing drive throughout pump and motor assures longer pump life.
  • Excellent self-priming capability. Pump may be located several feet from the tank above or below the liquid level.
  • Powerful, permanent magnet motor with low current draw and long life brushes.
FloJet Model No Voltage L/min
max
PSI
setting
Diaphragms Valves FloJet Price
3811 - 242 230v AC 5.3 150 Santoprene EPDM $375
 
border

border

border
border

click price tab          View cart
Total shipping per order Only $10 to any Australian Address - Prices Include GST
Trade customers - Buying for resale - Call 1800 607 388 or click > Trade contact

border
border

border

border
 
Full details
Suitable Uses Carpet cleaning machines, liquid transfer, reverse osmosis, use with some chemicals and water.
Suitable liquids Many chemicals, sea water, fresh water, sugars, whisky and wine etc - Click here for material charts
Warranty 12 months National Warranty Aust wide
Materials used Pump Head: Polypropylene   Diaphragms: Santoprene    Valves: EPDM
Electrical Voltage: 230v AC   Amp draw: 0.5A    Watts: 115W
Pressure switch Yes - Cut out pressure: 150 PSI (10.3 bar)
Internal Bypass Yes
Self prime Up to 2.4m maximum
Suction Strainer Not included - Click here for options
Liquid Temperature 71C Maximum
Inlet/Outlet Ports 3/8" Female NPT thread
Connections Included None - Click here for options
Fan cooled motor No
Dimensions Length: 260mm   Height: 94mm    Width: 100mm
Made in: Mexico
Spare Parts Click here for all spare parts
Accessories Click here for accessory index