Home   |   About Us   |   Contact Us   |   Trade Prices   |   Delivery   |   View Checkout   |   
Creative Pumps Thawte Logo
bottom-footer

FloJet - "Duplex" 2100-232 Diaphragm pump

Model: 2100-232   back to 230v index

FloJet 2100-232 230v AC diaphragm pump
Technical data sheet

The Flojet 2100 series is self-priming, diaphragm pump.

It may be located several feet from the tank, above or below the liquid level (it is not a submersible pump.)

For vertical pump mounting be sure that the motor is located on top.

Pump head may be rotated in 90 increments to simplify plumbing.

  • Built-in pressure switch automatically starts and stops pump instantaneously when discharge valve is opened and closed.
  • Can run dry without damage and handle liquids up to 54C.
  • Duplex Diaphragm Design eliminates troublesome shaft seal.
  • No metal contact with liquid being pumped.
  • Ball bearing drive throughout pump and motor assures longer pump life.
  • Excellent self-priming capability. Pump may be located above the liquid level.
  • Powerful, permanent magnet motor with low current draw and long life brushes.
FloJet
Model No
Voltage L/min
max
PSI
setting
Diaphragms Valves FloJet
Price
2100-232 230v AC 6 60 Santoprene Santoprene $399
 
border

border

border
border

click price tab          View cart
Total shipping per order Only $10 to any Australian Address - Prices Include GST
Trade customers - Buying for resale - Call 1800 607 388 or click > Trade contact

border
border

border

border
 
Full details
Suitable Uses Continuous duty as a medium volume water supply for carpet cleaning machines.
Suitable liquids Many chemicals, sea water, fresh water, sugars, whisky and wine etc - Click here for material charts
Warranty 12 months National Warranty Aust wide
Materials used Pump Head: Polypropylene   Diaphragms: Santoprene    Valves: Santoprene
Electrical Voltage: 230v AC   Amp draw: 0.25A    Watts: 57W   Power lead length: 40cm
Pressure switch Yes - Cut out pressure: 60 PSI (4.1 bar)
Internal Bypass No
Self prime Up to 2.4m maximum
Suction Strainer Not included - Click here for options
Liquid Temperature 54C Maximum
Inlet/Outlet Ports 3/8" Female NPT thread
Connections Included None - Click here for options
Fan cooled motor No
Dimensions Length: 200mm   Height: 75mm    Width: 85mm
Made in: USA
Spare Parts Click here for all spare parts
Accessories Click here for accessory index