Home   |   About Us   |   Contact Us   |   Trade Prices   |   Delivery   |   View Checkout   |   
Creative Pumps Thawte Logo
bottom-footer

FloJet - BW4002 and BW4022 "Bottled Water Pump" Single and Dual inlet

Model: BW2000A   back to 230v index

Flojet Single and Dual inlet bottled water drinking system.
Technical data sheet
 

Flojet BW4000 is a self-priming water bottle pump. These flojet pumps can be used on bottled water to feed a tap, for fridges & Coffee machines.

It may be located several feet from the tank, above or below the liquid level (it is not a submersible pump). It is available in either a single or double bottle draw. The suction lance has a float inside which automatically switches the pump on. This float also switches the system off when no water is available. There is a back flow valve to prevent water from flowing back into the bottle.

For vertical pump mounting be sure that the motor is located on top. This will prevent water from entering the motor chamber in event of a leak.

  • Built-in pressure switch automatically starts and stops pump instantaneously when discharge valve opens and closes
  • Compact design and plug-in port fitting make installation easy.
  • Float switch for automatic shut-off when bottle is empty
  • Built in check valve to prevent back flow.
  • Pump module has on/off switch
  • Universal seal cap to fit most bottled water.
  • Maximum flows of 4 litres per minute.
  • Ideal for fridges not near mains water.
  • Great for coffee machines, icemakers, drink water stations.
FloJet Model No Voltage L/min
max
PSI
setting
Inlets Valves FloJet
Price
BW4002-A 230v AC 3.9 40 Single EPDM $446
BW4022-A 230v AC 3.9 40 Double   $579
 
border

border

border
border

click price tab          View cart
Total shipping per order Only $10 to any Australian Address - Prices Include GST
Trade customers - Buying for resale - Call 1800 607 388 or click > Trade contact

border
border

border

border
 
Full details
Suitable Uses Pressure water supply to a coffee machine, ice maker, water fountain, in the office, home, mobile home, boat or weekender.
Suitable liquids Water
Warranty 12 months National Warranty Aust wide
Electrical Voltage: 230v AC   Amp draw: 0.3A    Power lead length: 1.0m with 3 pin plug
Pressure switch Yes - Cut out pressure: 40 PSI (2.76 bar)
Length of inlet hose 1.2 m
Self prime Up to 1.0m maximum
Liquid Temperature 54C Maximum
Connections Included 1 x T handle for single and 2 with dual bottle units.
Dimensions Length: 216mm   Height: 80mm    Width: 137mm
Made in: Mexico
Cleaning / Sanitising the unit Cleaning Instructions
Manufacturers Manual Instruction Manual