Home   |   About Us   |   Contact Us   |   Trade Prices   |   Delivery   |   View Checkout   |   
Creative Pumps Thawte Logo
bottom-footer

FloJet - LF 111421 "Demand" Diaphragm pump, used in racing cars - cooling suits

Model: LF 111421   back to 12v index

Flojet LF111421

Technical data sheet

FLOJET Industrial LF Pumps are designed for a wide range of applications and are constructed from a selection of materials suitable for handling a broad range of chemicals.

The LF series of diaphragm pumps are self-priming and can be run dry without harm.

They are intended for intermittent duty cycles but can be run continuously for short periods of time. The higher the duty cycle the shorter the expected life of the pump.

This ultra compact pump uses the duplex diaphragm design to deliver flow and pressure comparable to much larger pumps.

  • Sealed pressure switch automatically starts and stops pump when discharge valve opens and closes
  • Self-priming so pump can be located above supply tank.
  • Can run dry for extended periods of time without damage.
  • Built-in thermal protector.
  • Low amp draw for battery powered applications
FloJet
Model No
Voltage L/min
max
PSI
setting
Diaphragms Valves FloJet
Price
LF111421 12v 2.3 40 Santoprene Viton $179
 
border

border

border
border

click price tab          View cart
Total shipping per order Only $10 to any Australian Address - Prices Include GST
Trade customers - Buying for resale - Call 1800 607 388 or click > Trade contact

border
border

border

border
 
Full details
Suitable uses Water transfer, spraying applications, filtration and dispensing, etc
Suitable liquids Some chemicals, nutrients, sea water and fresh water, etc - Click here for material charts
Warranty 12 months National Warranty Aust wide
Materials used Pump Head: Polypropylene   Diaphragms: Santoprene    Valves: Viton
Electrical Voltage: 12v DC   Amp draw: 2.0A    Watts: 24W   Power lead length: 100mm
Pressure switch Cut out pressure: 40PSI (2.8 bar)
Internal Bypass No
Self prime Up to 1.76m maximum
Suction Strainer Not included - Click here for options
Liquid Temperature 43C Maximum
Inlet/Outlet Ports 3/8" Female NPT thread
Connections Included None - Click here for options
Dimensions Length: 173mm   Height: 65mm    Width: 100mm
Made in: China
Spare Parts Click here for all spare parts
Accessories Click here for accessory index