Home   |   About Us   |   Contact Us   |   Trade Prices   |   Delivery   |   View Checkout   |   
Creative Pumps Thawte Logo
bottom-footer

FloJet - D3131-B5011 "Duplex ll" Diaphragm pump 12 volt dc

Model: D3131-B5011

FloJet D3131-B5011 12v DC diaphragm pump

Technical data sheet

The Duplex II series of pumps incorporate the best technology and features developed by FLOJET.

Everything from the back flow preventer, check valves, bearings and diaphragm assembly to the motor, have been designed to make this truly the most advanced and reliable diaphragm pump available

Higher efficiency of the pump is evident in the longer life of the motor pump unit.

Duplex II is available in various performance ranges, voltages and with a choice of elastomers, making it easily adaptable to a diverse range of applications.

They are intended for intermittent duty cycles but can be run continuously for short periods of time.

The higher the duty cycle the shorter the expected life of the pump.

  • Self-Priming up to 2.4 m
  • Can run dry without damage
  • Chemical resistant material
  • Internal bypass standard
  • Built-in back flow preventer
  • Heavy duty ball bearing drive system
  • UL, CSA and CE models available
FloJet
Model No
Voltage L/min
max
PSI
setting
Diaphragms Valves Price
D3131-B5011 12v DC 6.1 60 Buna Buna $207
 
border

border

border
border

click price tab          View cart
Total shipping per order Only $10 to any Australian Address - Prices Include GST
Trade customers - Buying for resale - Call 1800 607 388 or click > Trade contact

border
border

border

border
 
Full details
Suitable uses Diesel transfer, low volume water supply, spraying, cooling, circulation, filtration and dispensing, etc
Suitable liquids Diesel, some chemicals, nutrients, sea water and fresh water etc - Click here for material charts
Warranty 12 months National Warranty Aust wide
Materials used Pump Head: Polypropylene   Diaphragms: Buna    Valves: Buna
Electrical Voltage: 12v DC   Amp draw: 7A    Watts: 84W   Power lead length: 15cm
Pressure switch Cut out pressure: 60 PSI (4.1 bar)
Internal Bypass Yes
Self prime Up to 2.4m maximum
Suction Strainer Not included - Click here for options
Liquid Temperature 54C Maximum
Inlet/Outlet Ports 3/8" Female NPT thread
Connections Included None - Click here for options
Fan cooled motor No
Dimensions Length: 219mm   Height: 92mm    Width: 82mm
Made in: USA
Spare Parts Click here for all spare parts
Accessories Click here for accessory index