Home   |   About Us   |   Contact Us   |   Trade Prices   |   Delivery   |   View Checkout   |   
Creative Pumps Thawte Logo
bottom-footer

FloJet - "Quad Pump" 4300-506 Diaphragm pump 12 volts dc

FloJet 4300-506 12v DC diaphragm pump

Technical data sheet

Flojet 4300 is a self-priming pump, diaphragm pump.

It may be located several feet from the tank, above or below the liquid level (it is not a submersible pump).

For vertical pump mounting be sure that the motor is located on top. This will prevent water from entering the motor chamber in event of a leak.

  • Built-in pressure switch automatically starts and stops pump instantaneously when discharge valve opens and closes
  • Compact design and plug-in port fitting make installation easy.
  • Can run dry without damage and handle liquids up to 54C.
  • No metal contact with liquid being pumped.
  • Ball bearing drive throughout pump and motor assures longer pump life.
  • Excellent self-priming capability. Pump may be located above the liquid level.
  • Powerful, permanent magnet motor with low current draw and long life brushes.
FloJet
Model No
Voltage L/min
max
PSI
setting
Diaphragms Valves Flojet
Price
4300-506 12v DC 18.5 45 Geolast Buna $333
 
border

border

border
border

click price tab          View cart
Total shipping per order Only $10 to any Australian Address - Prices Include GST
Trade customers - Buying for resale - Call 1800 607 388 or click > Trade contact

border
border

border

border
 
Full details
Suitable Uses Water transfer, construction, machinery & agricultural spraying applications etc
Suitable liquids Suits diesel transfer, potable water and some dilute chemicals. Click here for material charts
Warranty 12 months National Warranty Aust wide
Materials used Pump Head: Polypropylene   Diaphragms: Geolast    Valves: Buna
Electrical Voltage: 12v DC   Amp draw: 13A    Watts: 156W   Power lead length: 25cm
Pressure switch Cut out pressure: 45 PSI (3.1 bar)
Internal Bypass No
Self prime Up to 2.4m maximum
Suction Strainer Not included - Click here for options
Liquid Temperature 54C Maximum
Inlet/Outlet Ports Snap-in port
Connections Included 2 x straight hose barbs for 20mm - Click here for other options
Dimensions Length: 235mm   Height: 95mm    Width: 81mm
Made in: Mexico
Spare Parts Click here for all spare parts
Accessories Click here for accessory index