Home   |   About Us   |   Contact Us   |   Trade Prices   |   Delivery   |   View Checkout   |   
Creative Pumps Thawte Logo
bottom-footer

FloJet - "Quad Pump" 4100-143 Diaphragm pump 12 volt dc

Flojet 4100-143 12 volt dc Diaphragm chemical pump

The Flojet 4100-143 series is a self-priming, diaphragm pump

It may be located several feet from the tank, above or below the liquid level (it is not a submersible pump).

For vertical pump mounting be sure that the motor is located on top. This will prevent water from entering the motor chamber in event of a leak.

  • Built-in pressure switch automatically starts and stops pump instantaneously when discharge valve opens and closes
  • Compact design and plug-in port fitting make installation easy.
  • Can run dry without damage and handle liquids up to 54C.
  • No metal contact with liquid being pumped.
  • Ball bearing drive throughout pump and motor assures longer pump life.
  • Excellent self-priming capability. Pump may be located above the liquid level.
  • Powerful, permanent magnet motor with low current draw and long life brushes.
FloJet
Model No
Voltage L/min
max
PSI
setting
Diaphragms Valves FloJet
Price
4100-143 12v 18.5 - Santoprene EPDM $341
 
border

border

border
border

click price tab          View cart
Total shipping per order Only $10 to any Australian Address - Prices Include GST
Trade customers - Buying for resale - Call 1800 607 388 or click > Trade contact

border
border

border

border
 
Full details
Suitable Uses Water transfer, construction, machinery & agricultural spraying applications etc
Suitable liquids Many chemicals, sea water, fresh water, sugars, whisky and wine etc Click here for material charts
Warranty 12 months National Warranty Aust wide
Materials used Pump Head: Polypropylene   Diaphragms: Santoprene   Valves: EPDM
Electrical Voltage: 12v DC   Amp draw: 10A    Watts: 120W   Power lead length: 100mm
Pressure switch No
Maximum pressure 25 PSI (a PRV - Pressure relief valve must be used. Click here for options)
Internal Bypass No
Self prime Up to 2.4m maximum
Suction Strainer Not included - Click here for options
Liquid Temperature 54C Maximum
Inlet/Outlet Ports Snap-in port
Connections Included Port x 20mm Straight Barb (EPDM O' Rings) Click here for options
Fan cooled motor Yes
Dimensions Length: 230mm   Height: 95mm    Width: 100mm (with mounting feet 106mm)
Made in: Mexico
Spare Parts Click here for all spare parts
Accessories Click here for accessory index