Home   |   About Us   |   Contact Us   |   Trade Prices   |   Delivery   |   View Checkout   |   
Creative Pumps Thawte Logo

FloJet "Duplex" 2100 - 132 Diaphragm pump
Replaced by D3131-H5011

FloJet 2100-132 12v DC diaphragm pump

Technical data sheet

The Flojet 2100 series is self-priming.

It may be located several feet from the tank, above or below the liquid level (it is not a submersible pump).

For vertical pump mounting be sure that the motor is located on top.

Pump head may be rotated in 90 increments to simplify plumbing.

  • Built-in pressure switch automatically starts and stops pump instantaneously when discharge valve is opened and closed
  • Can run dry without damage and handle liquids up to 54C (130F)
  • Duplex Diaphragm Design eliminates troublesome shaft seal
  • No metal contact with liquid being pumped
  • Ball bearing drive throughout pump and motor assures longer pump life
  • Excellent self-priming capability. Pump may be located above the liquid level
  • Powerful, permanent magnet motor with low current draw and long life brushes
Model No
Voltage L/min
Diaphragms Valves Price
2100-132 12v DC 8.3 60 Santoprene Santoprene N/A



click price tab          View cart
Total shipping per order Only $10 to any Australian Address - Prices Include GST
Trade customers - Buying for resale - Call 1800 607 388 or click > Trade contact



Full details
Suitable uses Water transfer, agricultural spraying applications etc
Suitable liquids Some chemicals, nutrients, sea water and fresh water etc Click here for material charts
Warranty 12 months National Warranty Aust wide
Materials used Pump Head: Polypropylene   Diaphragms: Santoprene    Valves: Santoprene
Electrical Voltage: 12v DC   Amp draw: 7A   Watts: 87W    Power lead length: 20cm
On/Off switch No
Pressure switch Cut out pressure: 60 PSI (4.1 bar)
Internal Bypass No
Self prime Up to 2.4m maximum
Suction Strainer Not included - Click here for options
Liquid Temperature 54C Maximum
Inlet/Outlet Ports 3/8'' Female NPT thread
Connections Included None - Click here for options
Fan cooled motor No
Dimensions Length: 208mm   Height: 85mm    Width: 85mm - (with base plate 100mm)
Made in: Mexico
Spare Parts Click here for all spare parts
Accessories Click here for accessory index