EasyPump "Deep Pressure" pumps
- 240 volts
|
Submersible clean water pump - Ideal well pump
|
|
 |
 |
 |
Multipurpose, submersible pressure pump with built in float
switch, designed for or use
in wells, cisterns, lakes and rain water tanks for dewatering
and
irrigation
purposes with 2 to 5 sprinklers. Ideal for pumping needs between 8m and 30m
depth. Available with 2, 3 or 4 impellers.Pressure up to 30 PSI Manufactured with
non-corrosive and rust proof materials. Ceramic shaft sleeve
for long life and sand resistance. Energy efficient
motor with double ball bearing construction,
stainless steel shaft and motor housing; plus built
in overload protection. Environmentally safe,
oil-free Perfect cooling allows running of pump even
if partially submerged.
Fine stainless steel screen strainer on inlet. Multi-hose adapter for 3/4" garden thread
and 1" thread or clamp version and check valve
included.
|
Made in Italy
1 year warranty |
Deep 1000A |
Deep 1200A |
|
Max Litres
per hour
|
6000 |
6000 |
|
Max Litres
per minute |
100 |
100 |
|
Head - or
zero flow height |
36m |
48m |
|
Flow rate
at different
heights |
Chart
below |
Chart below |
|
Power usage - watts |
900 |
1100 |
|
Max Pressure |
52 PSI (3.6 bar) |
70PSI (4.8 bar) |
|
Length, width,
height - cm |
15 x 15 x 37 |
15 x 15 x 40 |
|
Power Cord length
|
10m |
10m |
|
Shaft material |
Stainless steel with ceramic sleeve |
Stainless steel with ceramic sleeve |
|
Max water temperature |
35°C |
35°C |
|
Thermal shut off (automatic) |
Yes |
Yes |
|
Suitable for salt water use |
No |
No |
|
Outlet (delivery) thread
|
1" female BSP |
1" female BSP |
|
Outlet Fittings supplied |
1" check valve
Multi use hose tail - 1" or 3/4" BSP or 20mm or 25mm hose barb |
1" check valve
Multi use hose tail - 1" or 3/4" BSP or 20mm or 25mm hose barb |
|
National
warranty - Australia wide
|
1 year |
1 year |
|
Prices -
Aus $
Including GST |
$459 |
$469 |
