|
 |
Light source boxes
|
|
Halogen light source - 4 colours* |
$769 Same unit for all lengths
(can also run other lights, call for details) |
|
Halogen light source - 8 colours** |
$898 Same unit for all lengths
(can also run other lights, call for details) |
|
|
|
|
Metal Halide light source - 4* colours* |
$1,169
Same unit for all lengths
(can also run other lights, call for details) |
|
Metal Halide light source - 8 colours** |
$1,279
Same unit for all lengths
(can also run other lights, call for details) |
|
|
|
|
Metal Halide light source - 4* colours.
With 2 channel remote |
$1,669 Same unit for all lengths
(can also run other lights, call for details) |
|
Metal Halide light source - 8** colours.
With 2 channel remote |
$1,839 Same unit for all lengths
(can also run other lights, call for details) |
|
Power cord lengths |
AC cable form power point to light source box
2.5m
Fibre optic cable from waterfall to light source 10m (additional cable $59
per m) |
For Metal halide installation instructions
.
Click
For Halogen installation instructions .......
Click
For general installation instructions ........
Click |
Side glow cable
32 strand side glow cable - $19 per m
42 strand side glow cable - $61 per m |
Track for side glow
Flexible track with adhesive backing - $37 per 2m
length
Rigid track (no adhesive) ................ $18 per 1.8m length |
|
*White, Blue, Pink, Green **White,
Blue, Pink, Green, Red, Yellow, Orange & Purple |
For similar spillways
-
Index
(Stainless Steel, Clear Acrylic etc in Projecting Sheet &
Sheer descent) |
|
Hint 1: A point to consider
for the projecting sheet effect: The
further the water drops, the narrower it becomes due to
surface tension. The drop in the photo's above is 1m to
give you an idea. Another way to understand this tapering effect is that for
every 50cm of drop, the width of the sheet of water narrows by about 100mm.
After about 1.2m of drop the sheet starts to break up. |
Colour brochure available ...
Call for a 4 page
full colour Hurlcon brochure with many more photos and information |
|
|
|
How to choose your pump:
The spillway can either have it's own independent pump or can
be linked to the main pool or Spa pump. Hurlcon projecting sheet spillway
requires a flow of at least 26 Litres per minute
and a maximum of 50 litres per minute for every 300mm of spillway width.
This flow rate is measured at
the spillway, therefore in choosing the pump, the distance* between the
surface of the water and the spillway is a factor that only you will know.
We have therefore made a number of suggestions below, with the pumps
covering a variety of price points and flow rates. The higher the
water is being pumped, the larger the pump must be. Click
for projection chart and pump flow recommendations |
